What is the HDD in the B8300 Used For?

Normal print
In this mode, no input from the operator panel of the printer is needed

Hold after print
In this mode, print data will be held in the Hold Job List even after printing is complete. Printing can be executed again from the operator panel of the printer if needed. Also, the data can be deleted from the operator panel if it is not necessary.

Hold before print
This mode can reduce the possibility of missing printout. If printing is made in this mode from the computer, print data will not be output immediately and will be stored in the printer as a held job until released from the operator panel.
A print start operation can be made on the operator panel of the printer as needed. You can also delete the data without executing printing.

Proof print
This mode can prevent a high-volume misprint when many sets must be printed. If printing is executed in this mode, only one set will be printed and the remaining sets will be held as a hold job.

After checking the finished printout, including print position on paper and stapling position, you can start printing of the remaining sets from the operator panel of the printer. you can also delete the data without executing printing.

Password (5 digits)
If a password is set in the printer driver setting, a password entry is needed to start printing of a password protected job. This mode can increase the security of hold jobs.

Product(s): B8300n