How to Reset the B6200/B6300 Back to the Original Default Settings

Reset the B6200/B6300 back to the original default settings.

Note: This will change all settings back to the defaults, it is recommended to print the current system settings before performing this procedure, by following these steps:

Press Menu once.
Press Down Arrow once.
Press Right Arrow once.
Press Down Arrow three times.
Press Right Arrow once.
Press Select. This will print the current settings.

Step #1: Press the left and right arrow buttons for a second or so release the buttons, then press the
on-line button to enter the Diag. Menu.
Display:
Diag. Menu
Preventive Diag.

Step #2: Press the down arrow button twice:
Display
Diag. Menu
Adjustment

Step #3: Press the right arrow button once:
Display
Adjustment
DC 131 NVM R/W

Step #4: Press the down arrow button once:
Display
Adjustment
DC 301 NVM Init.

Step #5: Press the right arrow button once
Display
Adjustment
DC 301 NVM Init.SYS

Step #6: Press the Feed/Select button once:
Display
DC 301 NVM Init.
SYS*

Step #7: Exit the Diag.Menu

Product(s): B6200; B6200n; B6300n