Instructions to Check Reflector Operation

(1) Open the poly bag, and take out the Toner-cartridge.

(2) Remove the tape to the position like the figure.

(3) Hold the Toner-cartridge horizontally, so that the Lever-sensor may go up and down vertically.

(4) When it does not see the Lever-sensor like the figure, turn the gear in the direction of the arrow, and it tries to see the Lever-sensor.

(5) Return the tape to former position.

(6) Put the Toner-cartridge vertically.

(7) Move Lever-sensor like the figure.

(8) Confirms the Lever-sensor is returned smoothly.

(9) Repeat (7) and (8), 3 times. The Toner-cartridge is wrong when the Lever-sensor does not work from the position of (7) or when it does not return smoothly.

©2005 Oki Data Americas, Inc.