How To change a Konica Minolta 2400 cartridge

If the printer has indicated that the unit is low/empty/depleted, then you need to purchase a BRAND NEW unit and install it. Click here for information on prices, part numbers and availability for consumables. Printing can continue even though the warning appears. However, the color gradually fades out, so replace the toner cartridge as soon as possible.

K - Black toner
C - Cyan toner
Y - Yellow toner
M - Magenta toner

magicolor 2430 DL

When the toner is empty, the toner indicator lights up. Follow the procedure described below to replace the toner cartridge.

For magicolor 2400W:

1. Check the control panel to see which color of toner is empty. As an example, the procedure for replacing the cyan toner cartridge is described below. If the Auto Toner Replace check box of Mode Setting in the Status Display was selected, printing stops when the toner is empty, and the empty toner cartridge moves so that it can be replaced. Skip to step 3.

2. Press the Rotate Toner key. The lit indicator for the cyan toner goes off, and then the toner cartridge carousel rotates. When the cyan toner cartridge is positioned so that it can be replaced, the indicator for the cyan toner lights up again. Press the Rotate Toner key once to move the cyan toner cartridge so that it can be replaced. With each additional press of the Rotate Toner key, the black, yellow, then magenta toner cartridge moves so that they can be replaced. The indicator for the toner cartridge that was moved so that it can be replaced lights up.

For magicolor 2430DL:

1. Check the message window to see which color (X) toner is out. Follow the steps below.

By carrying out the steps below, the carousel automatically stops at the position where the empty toner cartridge can be removed.

2. Proceed to step 3 below this table.

3. Pull the lever, and then open the top cover. If there is paper in the output tray, remove it, and then fold up the output tray before opening the top cover. Do not touch the transfer belt.

4. Check that the toner cartridge to be replaced has been moved to the front, and then open the front cover. You can identify the toner cartridge by the color of the handle and by the letter molded into the handle: C (cyan), M (magenta), Y (yellow) and K (black).

5. Pull the handle on the toner cartridge toward you, and then pull the toner cartridge up to remove it. Do not manually rotate the toner cartridge carousel. In addition, do not rotate the carousel with force, otherwise it may be damaged.

Dispose of the empty toner cartridge according to your local regulations. Do not burn the toner cartridge.

6. Prepare a new toner cartridge.

7. Shake the cartridge a few times to distribute the toner. Make sure that the toner roller cover is securely attached before shaking the toner cartridge.

8. Remove the cover from the toner roller. Do not touch or scratch the toner roller.

9. Align the shaft on each end of the toner cartridge with its holders, and then insert the cartridge. Before inserting the toner cartridge, make sure that the color of the toner cartridge to be installed is the same as the label on the toner cartridge carousel.

10. Press down on the toner cartridge until it snaps into place.

11. Close the front cover.

12. Carefully close the top cover. When the top cover is closed, the black toner cartridge automatically moves so that it can be replaced. With each press of the Rotate Toner key, the yellow, then magenta toner cartridge moves so that it can be replaced. If the Auto Toner Replace check box has been selected in Mode Setting of the Status Display, closing the top cover after replacing the toner cartridge automatically moves the next toner cartridge so that it can be replaced. If there are no more empty toner cartridges the printer warms up, then automatically resets to be ready to print.

13. Press the Cancel key to reset the printer and clear the indicator message. If no operation is performed for 30 seconds after the top cover is closed, the printer automatically resets. The printer must complete a calibration cycle (less than 2 minutes) after a toner cartridge has been replaced. If you open a cover before the printer is reset, the calibration stops, then starts over again after the cover is closed.