Operator Panel Displays "Fatal Error (Service Call) 008" |
|
Operator Panel displays a Fatal Error (Service Call) 008. Fan on the Main Board (CRM) has either failed or is not connected, thus causing the printer to overheat. The printer is not able to detect if this fan is faulty or simply disconnected. This is an intermittent problem, due to overheating, and will go away temporarily if the printer is powered down and then powered on after a few minutes. To permanently resolve the problem, reconnect or replace this fan. ©2005 Oki Data Americas, Inc.
|
|
|
|
No comments have been posted.
|
|
|
|
|
Glossary
Contact Us
6-6-2005
Views: 3612
6-22-2005
Views: 1715
