Printing Configuration Page on the magicolor 5450

A configuration page can be printed via the printer panel menu (which is a good troubleshooting qualifier if you can't print to the printer), or using the printer's web page (PageScope Lite).

Via Print Panel

1. Printer panel should read READY.

2. Press the MENU/SELECT button.

3. Press the Down Arrow to highlight PRINT MENU.

4. Press the MENU/SELECT button.

5. Press the Down Arrow to highlight CONFIGURATION PAGE.

6. Press the MENU/SELECT button.

7. Press the Down Arrow to highlight PRINT.

8. Press the MENU/SELECT button.

9. Press the Left Arrow to return to READY.

Via PageScope Lite (the printer's web page)

You can use the printer's web page by following the steps below:

This procedure requires that your printer be connected via an Ethernet cable and have an IP address assigned to and implemented on the printer.

1. Go to your browser and type the IP address of the printer in the address box.

2. When the first dialog frame opens, click on the Print navigation button along the top menu bar.

3. Next, click on the Report Types button on the left-hand side of the screen.

4. You will be provided a list of report types to choose from. Select the Configuration Page radio button.

5. Finally, select the Print button at the bottom of the screen.