Cleaning For Light Stripes on Xerox Phaser Printers

Solution: Clean for light stripes
1. At the printer's front panel, select Troubleshooting, select Print Quality Problems, select Eliminate  Light Stripes, then press the OK button. 
2.  Repeat Step 1 up to 3 times if the stripes still appear. 
3.  If the problem continues, turn off the printer for at least 4 hours.
4. Turn on the printer and if necessary, repeat Step 1.

Fig. 1

If all four color bars are missing on the test page, follow the steps below (See Fig. 2).

1. Open the exit cover, inspect the paper-exit area for debris, and if necessary, remove the debris.
2. Under the exit cover, lift the green guide, wipe the white plastic paper release blade with a lint-free cloth, then close the exit cover.
3. Open the side door on the right panel, remove the orange maintenance kit, wipe the clear plastic wiper blade with a lint-free cloth, replace the maintenance kit, then close the side door.
4. If the problem continues, follow the steps for Random Light Stripes.

Fig. 2