Printing a Configuration Page

1. Ensure that the printer panel LCD says READY.

2. Press the Menu Select button.

3. Press the Right Arrow until you see SPECIAL PAGES.

4. Press the Menu Select button.

5. Press the Right Arrow until you see CONFIG PAGE.

6. Press the Menu Select button. A configuration page should print, and the printer returns to READY automatically.

The printer configuration page contains information about:

Consumables Usage (Status, Percent remaining, Max life, and Percent coverage)

Page Counters (Total faces and Duplex)

Options Installed

Memory (On Board and DIMMs added)

Firmware version (Controller, Boot Code, and Engine)

Network Interface (WINS/NetBIOS Resolution, NetBIOS Name, Domain/Workgroup, Primary WINS, Secondary WINS, Rendezvous Discovery, DHCP, BOOTP, HTTP, SNMP, IP Address, Subnet Mask, Gateway Address, and MAC Address)

Engine Settings (Serial Number, Panel Language, Energy Saver, Auto Continue, Tray Chaining, and Toner Empty)