Printing a Configuration Page on the magicolor 2300

The configuration page contains information about the Host Device, the Printer, Consumables Statistics and Mode Settings.

Instructions:

1.  Double-click the magicolor 2300W Status Display icon in the System tray, OR go to Start/Programs/KONICA MINOLTA magicolor 2300W Utilities and select KONICA MINOLTA magicolor 2300W Status.

2.  In the resulting dialog box, select Printer from the menu bar, then select Print Config Page from the drop-down.

A configuration page will print containing the following information:

Date and Time printed (e.g., Friday  09/10/2004   12:15)

Host Information:

Printer Name (e.g., KONICA MINOLTA MAGICOLOR 2300W)
Model Name (e.g., KONICA MINOLTA MAGICOLOR 2300W)
Driver Version (e.g., 1.1.817.0)
Port Name (e.g., USB002)
OS Version (e.g., Windows XP, Service Pack 1)
OS Language (e.g., ENU)
CPU (e.g., INTEL-586-15)

Printer Information:

Device ID
    MFG (e.g., KONICA MINOLTA)
    CMD (e.g., KMPS)
    MDL (e.g., magicolor 2300W)
    CLS (e.g., PRINTER)
    DES (e.g., KONICA MINOLTA magicolor 2300W)
USB Vendor ID (e.g., 132B)
USB Product ID (e.g., 2001)
Controller Firmware Version (e.g., 4818)
Engine Firmware Version (e.g., 413950F30800)
Serial Number (e.g., 73x132x16x)
Memory Size (e.g., 32 MB)
Total Page Count (e.g., 1245)
Color Page Count (e.g., 894)
B/W (Monochrome) Page Count (e.g., 351)

Consumables information

Black (Max Life and Remaining percentage, e.g., 1500 and 14%)                   
Cyan (Max Life and Remaining percentage, e.g., 1500 and 18%)
Magenta (Max Life and Remaining percentage, e.g., 1500 and 24%)
Yellow (Max Life and Remaining percentage, e.g., 1500 and 44%)
Drum Unit (Max Life and Remaining percentage, e.g., 4500 and 4%)

Mode Setting Information

Auto Continue mode (default is ON)
Toner Empty mode (default is STOP)
Energy Saver mode (default is OFF)

Caution:  If the current toner cartridge installed was a 4500K cartridge, and you forgot to reset the printer panel to reflect that when the cartridge was installed, you may get a premature 'low' or 'empty' or 'replace' message.